Hi, when do Ineed NetPro? And what´s difference between netpro and hw config. Thanks. System prerequisites: PC or PG with Win95 - STEP 7 V with corrected version K (The software update of STEP 7 V is supplied together with NETPRO.) - Memory requirements: 8 Mbytes on the hard disk. NETPRO is protected against unauthorized copying by means of an authorization diskette. Your SIMATIC. 7 Jan Netpro Siemens Step 7 LIVE PLC Questions And Answers.
Communication with Siemens S PLCs via Ethernet. TNOI34 Rev B. Now a connection between the PLC and the G3 HMI must be created. This connection is set up using Net Pro. Select PLC CPU and double click on the Connections icon to access the NetPro configuration tool, as shown in. Figure Figure Communication between multicode reader O2I1xx and Siemens Simatic S7. 7. Set-up of the hardware configuration / NetPro Step7. Set up and link the multicode reader as "Andere Stationen" in NetPro. ▻. Objects of NetPro. Double-click on the PG/PC Station. An unconnected PG/PC station is now added in the network pane: Right click the PG/PC and click on. Object Properties and select the Interfaces tab and click New. Access Siemens PLCs and their VIPA equivalents through an existing Talk2M connection. (How to ).
As said in The Siemens Theatre chapter, two PLC to communicate with this mechanism must have a S7 connection created with NetPro. If the two PLC systems reside in the same project, Simatic Manager can keep track of the connections, otherwise both will have an unspecified partner as counterpart. But, from the data.